Web Service Settings - Spooler - Print Forwarding - Epson OmniLink TM-T70-i Technical Reference Manual

Web Service Settings - Spooler - Print forwarding

You can set the print forwarding route when using print forwarding with this product.
 You can use with TM-i firmware Ver.4.1 or later for this product.
 When using print forwarding, make sure you enable the spooler.
Item
Message Text
Apply
Print forwarding
route to be regis-
tered
Register
Registered Print forwarding routes
84
Message Text Set the text printed on notification messages when print
forwarding occurs.
One-byte alphanumeric characters: within 255 characters
Text Attributes Set the text decorations for notification messages.
Position Set the print position for notification messages.
Cut Set whether or not to cut paper after printing a notification
message.
Save the notification message settings for this product.
Primary Printer Set the printer used for the print forwarding route.
Secondary Set the printer for the print forwarding location when printing fails
Printer on the primary printer.
Tertiary Printer Set the printer for the print forwarding location when printing fails
on primary printer and secondary printer.
Save the settings for the print forwarding route to TM-T70-i.
Display a list of the registered print forwarding routes.
Delete Clears the settings for selected print forwarding routes.
Description