Table of Contents
Advertisement
Available languages
Available languages
Using Your Monitor:
Your MONIOR is designed to provide five functions (Tune, Speed, Distance, Calories and Scan).
1) SPEED can be dis
played in either "Miles" or "KM" per hour.
2) DISTANCE is displayed from 0.1-9999 miles or km.
3) TIME is displayed in hours: minutes: seconds up to 23 hours
4) CALORIES is displayed 1-9999 KCAL.
5) SCAN sequentially displays Times, Distance and Calories to help you monitor each functi
6) The monitor will shut off itself. If no m
To turn the monitor "ON"
1) Press the 'Mide/Reset' button for 2 seconds to clear the monitor.
2) The monitor will autom
3) Initial start up will be in SCAN mode.
To Set Miles or Kilometers
1) Flip to switch on back of the monitor t
2) Take one battery out fr
3)
Now replace the battery back into the case.
4)
Your monitor will be in the mode of m
To View "Time" Only
1)
Selectively press the "Mode/Reset" button until "D" appears i
2)
You are now in "T
To View "SPEED"
1)
Speed is automatically displayed as you begin to pedal.
To View "Distance
" Only
1)
Selectively press the "Mode/Select" button until "D" appe
2)
You are now in "Dista
To view "CALOEIES" Only
1)
Selectively press the "Mode/Reset" button until "C" appears in the display.
2)
You are now in "DIST
3)
Caloris are calculated based on the speed of pedaling and the duration of th
burned will automatically stop when you stop pedaling.
To View by Using "SCAN"
1)
Selectively press the "Mode/Reset" button until "{}" appe
2)
You are now in "SCAN
3)
You may also reset your monitor at any time by pressing and holding the "M
button. This will automatically pl
To Reset your Monitor
1)
To reset or clear your monitor, simply press and hold the "M
seconds.
2)
Your monitor is now reset and all functions will appear as zero until you begin your
workout.
ovement is detected for 4 minutes.
atically turn on as your begin to pedal.
o desired setting.
om the case.
easurement selected.
ime" function. The "SCAN" function has ben disengaged.
nce" funtion. The "SCAN" function has been disengaged.
ANCE" function. The "SCAN" function has been disengaged.
" MODE.
ace you in "SCAN" mode.
12
12
: 59 minutes: 59 seconds.
n the display.
ars in the display.
e time-Calories
ars in the display.
ode/Reset"
ode/Reset" button for 2
on.
Advertisement
Table of Contents
