Table of Contents
Advertisement
Available languages
Available languages
Step 4
ATTACH THE PEDALS
a)
Thread the pedal rod through the tube on the main frame (1).
b)
Slide the pedals (37) and spacers (36) onto the pedal axle (42) (spacer inside, the pedal) and
fasten with washers (36) and locknuts (35).
c)
Connect the socket of sensor (72) to the plug of computer (71), then press the
into position on the console (73).
Step 5
ATTACH THE SEAT TO THE SEAT CARRIAGE
Seat
a)
Attach the
(28) onto the aluminum track (29) for both sides.
b)
Insert the end stoppers (13) to the end holes of track (29).
c)
Attach the track end cap (12) to the rear end of the aluminum track (29).
8
Computer
(71)
Advertisement
Table of Contents
