Do not use the spout and the ring with a glass bottle.
•
Children using a glass bottle without adult supervision may
cause hazardous situations.
Do not put the spout cup in the freezer compartment.
•
To prevent scalding, let hot liquid cool down before you fill
•
the spout cup.
Cleaning and sterilization
After each use, disassemble all parts and clean them thoroughly
•
in warm water and some washing-up liquid. You can also clean
all parts on the top rack of the dishwasher (Fig. 1).
If necessary, clean the spout with the Philips Avent cleaning
•
brush sold separately (SCF145).
Do not use abrasive or anti-bacterial cleaning agents or
•
chemical solvents.
Do not place parts directly on surfaces that have been
•
cleaned with anti-bacterial cleaners.
Food colorings can discolor parts. This is not harmful.
•
After cleaning, sterilize the spout cup. Place the spout cup in
•
boiling water for 5 minutes. This is to ensure hygiene.
The spout cup is also suitable for electric and microwave
•
sterilization. Only use a microwave sterilizer or Philips Avent
microwave sterilizing bags (SCF297) to sterilize any part of
the spout cup in the microwave.
Storage:
For hygiene and maintenance, disassemble the spout cup and
•
store it in a dry and covered container.
Keep the spout cup away from heat sources and direct sunlight.
•
Interchangeability chart
The screw top and container of the spout cup are compatible
•
with several Philips Avent bottles and cups. For details,
see the interchangeability chart (Fig. 2).