Commissioning; Allocation Of Devices And Specifying Channels - ABB RTC-F-1.PB Technical Manual

ABB-free@home
7

Commissioning

Commissioning is always carried out via the Web-based surface of the System
Access Point.
The System Access Point establishes the connection between the free@home
participants and the smartphone, tablet or PC. It is used to identify and program
the participants during commissioning.
Devices which are physically connected to the free@home bus, log themselves
automatically into the System Access Point. They transmit information about their
type and supported functions (see Table 2, chapter 4.3).
During initial commissioning all devices are given a generic name (e.g. room
temperature controller1, etc.). The user must change this name to a name
practical for the system (Example: "Room temperature controller living room").
The devices must be parameterised for the use of the functions.
Commissioning of the room temperature controllers is described in the following
chapters. Here it is assumed that the basic commissioning steps of the overall
system have already been carried out. General knowledge about the Web-based
commissioning software of the System Access Point is assumed.
Note...
General information about commissioning and parameterization is
available in the technical reference manual and the online Help of the
System Access Point.
7.1

Allocation of devices and specifying channels

The devices connected to the system must be identified, i.e. they are allocated to
a room according to their function and are given a descriptive name.
The allocation is made via the allocation function of the Web-
based user interface of the System Access Point.
Technical Manual 1473-1-8574
®
Commissioning
│14