ABB RTC-F-1.PB Technical Manual page 18

ABB-free@home
7.2.1 Settings of the room temperature controller
Actuator settings
Room Temperature Controller
Room Temperature Controller
Other settings
Extension unit operation - The room temperature controller can be configured in
the device settings as extension unit. In this setting only the temperature sensor
of the main unit is evaluated, the extension unit serves only for selecting the op-
erating mode, and the set-value temperature.
Technical Manual 1473-1-8574
®
1
2
3
4
5
6
[1] Changing the name
[2] Deleting the channel via 'X'
[3] Switching of the actuator via the button
[4] Setting the ECO temperature reduction
in °C - Specifying the value to which the
temperature is reduced after the ECO
mode is activated.
[5] Setting the temperature correction in °C -
Manual increase/reduction of the tempera-
ture value if the temperature is repeatedly
not reached automatically.
[6] Setting the switch-off delay in seconds
during absence
If the ECO mode is deactivated by a
movement detector, the switch-off delay
can be specified here when the ECO
mode is to be re-activated after the room
is exited.
Commissioning
│18