Insert Status; Null Blank Status; Type-Ahead Status - IBM 3708 Description

Insert Status
Null Blank Status
XOVRFLO
Meaoing: 3708 Receive Queue Overflow. The receive queue can overflow
when the following conditions occur:
• The host response time is very slow
• The 3708 is sending data too fast (for example, doing file transfer
applications).
Action: Press the Reset key sequence defined for the terminal and enter the
data again.
XSTATLN
Meaning: Status Line Required for IDENT. The 3708 requires the status
line to be on before assigning printers.
Action: Press the Reset key sequence defined for the terminal, turn on the
3708 status line, and try the IDENT function again.
X WAIT
Meaning: Wait for the 3708 to finish. The 3708 displays this message when
you initiate a host data transfer while the 3708 is in slowdown mode. This
condition occurs when the 3708 runs low on buffer space because of
overloading.
Action: Press the Reset key sequence defined for the terminal. Continue to
enter data characters, or try an Enter function. If the slowdown condition
has been cleared, the data is sent to the host.
X HOST
A
NIB
Meaning: An upstream link has recorded a Receiver Not Ready (RNR)
from host. The host is temporarily unable to accept more data.
Action: Press the Reset key sequence defined for the terminal and try the
function again.
Meaoing: You can insert characters into the middle of fields.
Action: None.
Meaning: Null/blank processing is enabled.
Action: None.
Type-Ahead Status
TYP
4-42
IBM 3708 Description
Meaning: The type-ahead key queuing function is enabled.
Action: None.