Table of Contents
Advertisement
IBM 3161:
The IBM 3161 with Enhanced 3708 Attachment is supported by
Terminal ID 2A on the 3708's Terminal Selection (C2) screen. It provides the
following additional enhancements:
• The Reset key performs the 3270 Reset key function.
• The 3161 OIA (line 25 of the display) is used as the 3270 Status Line.
IBM 3162:
The IBM 3162 with 3708 Support Functions is supported by Terminal
ID 2A on the 3708's Terminal Selection (C2) screen. It provides the following
additional enhancements:
• The Reset key performs the 3270 Reset key function.
l
• The 3162 OIA is used as the 3270 Status Line. The Operator Information Area
is line 25 (or line 29 for model 5 emulation) of the display.
• The 3270 lA Keyboard is supported (122 keys). You can obtain this
configuration by ordering 3162 Model 870
2
or 3162 Model87P .
IBM 3163 and 3164:
The IBM 3163/3164 VT100/3708 Emulation Cartridge is
supported by Terminal ID 2A for the 3163 and Terminal ID 2B for the 3164 on the
3708's Terminal Selection (C2) screen. It provides the following additional
enhancements:
• The Reset key performs the 3270 Reset key function.
• The 3163/3164 OIA (line 25 of the display) is used as the 3270 Status Line.
• The 3270 1A Keyboard is supported (122 keys). You can obtain this
configuration by ordering part number 1390702 or 1390238.
1
A native 3162 can be configured, by host command, to allow the Reset key to operate. You may also use the UDT
TLIS function to program the 3708 to send the sequence, ESC ( : (X 'IB283A '), that enables the 3162 Reset AID
function. The UDT must also specify ESC
!
z (X' 1 B217 A') as the Reset function. You can do this by creating a
UDT (using the 3162 terminal table as the base) and setting address X'OAO' to the Reset key function number, 10.
2
Model 870 consists of a green monitor, logic unit, and keyboard.
3
Model 871 consists of an amber monitor, logic unit, and keyboard.
Chapter 1. Introduction
1-19
Advertisement
Table of Contents
