The Terminal Table Format - IBM 3708 Description

The Terminal Table Format
This section describes in detail the three parts of each terminal table.
Each terminal table contains three sections:
• General description section (addresses X'OO' to X'OS')
• Keyboard mapping definition section (addresses X' 06' to X' AS')
• Terminal control section (addresses X' A6' to X' 12B').
Enhanced terminal tables contain an additional section:
• Customization section (addresses X' 12C' to X' 1 C3 ').
The content of each section is shown in Table 4-9 through Table 4-12. A
description of each section follows Table 4-12. Tables of values that can be used in
the various fields follow each description. Addresses are given in hexadecimal
format, which you should use when creating or modifying user-defined terminal
tables.
Table 4-9. General Description Section of a Terminal Table
Hex
Address Description
00 TerminalID
01 Flags
02 Cursor addressing class
03 Alternate control sequence character
04 Intermediate control sequence character
05
(Not used, set to X'OO')
Table 4-10. Keyboard Mapping Section of a Terminal Table
Hex
Address . Description
06 - 25
Function number for X'OO' through X'IF'
26 - AS
Function number for ESC X' 00' through ESC X' 7F '
Table 4-11 (Page 1 of 2). Terminal Control Definition Section of a Terminal Table
Hex
Address Description
A6 Byte count for ERASE EOL sequence
A7-AB ERASE EOL sequence
AC Byte count for CLEAR SCREEN sequence
AD-Bl
CLEAR SCREEN sequence
B2
Byte count for CURSOR
UP sequence
B3-B7
CURSOR
UP sequence
4-54
IBM 3708 Description