Introduction - Chappee EDENA CLASSIC E 35 Installation And Servicing Instructions

1.0 INTRODUCTION

NOTE:This appliance must be installed in accordance
with the manufacturer's instructions and the regulations in
force. Read the instructions fully before installing or using
the appliance.
Boilers are built in accordance with the following
European directives:
Directive "Low voltage"
Directive "Electromagnetic 89 / 336 / EEC
compatibility"
Directive "Gas equipment"
Directive "Output"
Directive "Pressure vessels" 97 / 23 / EEC
This boiler and fittings included comply with the
directive, without however being subject to EC marking
(according to Article 3.3).
BAXI declare that no substances harmful to health
are contained in the appliance or used during
appliance manufacture.
1.1 Description
1. Th Osprey 2 CFL is a fully automatic gas fired floor
standing conventionally flued boiler with a cast iron
heat exchanger.
2. The boiler is designed for use with fully pumped open
vented or sealed water systems with an indirect hot
water cylinder.
3. The boiler is available in outputs of 35.0, 43.0,52.8
and 64.5kW.
4. It is designed for use on Natural Gas (G20) and
propan (G 31).
5. The boiler data badge is positioned on the boiler inner
front panel.
6. The boiler is intended to be installed in residential /
commercial / light industrial E.M.C. environments on
a governed meter supply only.
7. All systems must be thoroughly flushed and treated
with inhibitor.
73 / 23 / EEC
90 / 396 / EEC
92 / 42 / EEC
Data badge
3
Inner Front
Panel
Réf. : CH - 1254 - I - 0 - EN