Buckingham 60007 Instructions

Buck tool tether

Using a girth hitch, attach the Loop End of the tether to a Body Belt Accessory Ring (Fig. 1).

Body Belt

Accessory Attachment

(snap or carabiner)

Using the Cinch Loop and the Snap End of the tether, make a girth hitch around the handle

of the tool as shown in Fig. 2, 3, & 4.

Fig. 2

The brass snap of the tether may be used for attachment to the body belt accessory snap,

or accessory carabiner, when not using or transporting tools (Fig.1).

60007.DOC (Rev. 8/18/16)

PN 230376

INSTRUCTIONS / WARNINGS

P/N 60007 Buck Tool Tether

Fig. 1

Fig. 3

OVER

Body Belt Accessory Ring

Fig. 4

Table of Contents

Do you have a question about the 60007 and is the answer not in the manual?

Page 1 INSTRUCTIONS / WARNINGS P/N 60007 Buck Tool Tether ATTACHMENT Using a girth hitch, attach the Loop End of the tether to a Body Belt Accessory Ring (Fig. 1). Body Belt Accessory Ring Body Belt Accessory Attachment (snap or carabiner) Fig. 1 Using the Cinch Loop and the Snap End of the tether, make a girth hitch around the handle of the tool as shown in Fig.
Page 2 / unused condition. BUCKINGHAM MFG. CO., INC. BINGHAMTON, NY 1-800-937-2825 www.buckinghammfg.com Information contained in these written instructions supersedes all other information (written, audio, video etc.) produced by Buckingham Mfg. prior to the revision date of this document. 60007.DOC (Rev. 8/18/16) PN 230376...