Page 1
Manufacturer’s instructions shall be provided to users with this product. Read and understand all instructions and warnings provided by Buckingham and included with the product before use. Failure to do so could result in your serious injury or death. If suitability for intended use is questionable, always consult your Supervisor, Safety Director or contact Buckingham Mfg.
Page 2
INSPECTION: Prior to each use, carefully inspect equipment for indications of wear and /or deterioration. The inspection should include, but not be limited to the following: All hardware and connecting devices are clean and functioning properly, are free of cracks, deformation, burrs, excessive wear or modifications.
Page 3
Examples of Improper Attachment Fig.3 Fig.4 Fig.5 Fig.6 Examples of Improper Attachment (Ref. Fig. 3 – 6): Do not connect: Locking Snaphook to anchor point other than work positioning D-ring. Positioning Device back onto itself and use as a cinch or choking device. ...
Page 4
E-mail – sales @buckinghammfg.com Patent Pending Web site – www.buckinghammfg.com Information contained in these written instructions supersedes all other information (written, audio, video etc.) produced by Buckingham Mfg. prior to the revision date of this document. 48129W2Y.Doc PN 230280 (Rev. 4/27/16)
Need help?
Do you have a question about the 4812 Series and is the answer not in the manual?
Questions and answers