Overview Of All Faulty Luminaires (Complete Overview) - Eaton CGLine+ Web-Controller Installation And Operating Instructions Manual

7 .3 Overview of all faulty luminaires (complete overview)

2
1
3
The menu "Oveview" 1
a fault 3 :
L = line no. 1-4
n
Z = zone 2-16
n
B = luminaire address 1-400
n
ID = 6-digit hex address for the luminaire, e.g. FE18AC
n
Category = category of the luminaire type (SL= Safety luminaire, RZ= Exit sign
n
Type = luminaire type, e.g. Guideled SL
n
Information = additional text for information which is entered in the CGVision or CGLine+ PC
n
software
4 : • Absent = communication fault
to the luminaire
• Safety Bulb = lamp error
• Battery = battery or charge error
• White clock = FT failure
• Blue clock = DT failure
• i = luminaire operation mode
Installation and Operating Instructions CGLine+ Web-Controller 40071860236 (E) February 2019 www.eaton.com
and the tab "Overview luminaire failure"
5 : • Discover Date = date when the luminaire
• Next test = next automatic FT or DT
• Luminaire position = target designation of
7 Common operation of the web screens
4
2 display all luminaires with
was detected by the Web-Controller
luminaire
Example shows one lumi-
naire failure with following
information:
Luminiare in Line 1
n
Luminaire in Zone 1
n
Luminaire address 1
n
(Lum1 in Zone)
Category: Exit sign
5
n
Type: EB LED CGLine
n
Information text (max. 20
n
chara.)
Batteryfailure
n
Luminaire in „maintained
n
light"
Luminaire was added in
n
the Web-Controller at this
date
Next FT or DT is on
n
01/01/2015 at 6:00 p.m.
With click on the magni-
n
fying glass, it is possible
to enter to the building
layout picture, if it is pre-
15