Honeywell MILLER 1032363 User Manual page 4

Energy absorbing lanyards of the Ø11mm « edge tested »
(resistance to tearing on edge tested
THIS USER MANUAL IS SUPPLIED WITH THE PRODUCT AND MUST BE READ BEFORE INITIAL USE AND THE
WHEN THE BUYER IS NOT THE USER, HE MUST SUPPLY THIS MANUAL TO THE USER .
Energy absorbing lanyards of the Ø11mm « edge tested »
Description of components:
1. PA-PES Ø11mm line lanyard (tearing strenght
tested on sharp edge)
2. PES energy absorber with «edge-tested» logo
Connector is compliant with standard
3.
362:2005) - D link on back of harness: use on
sharp edges*
Connector is compliant with standard
4.
362:2005) - anchoring side: use on sharp edges*
* terminations possible in accordance with table (p40)
1
4
NT90023116 IND B.indd 4
USER MANUAL
Out of the Standard, following the VG11 PFE 11 .074 file .
Conform to EN 355:2002
INSTRUCTIONS IT CONTAINS COMPLIED WITH.
(in the event of an inaccuracy, please consult the manufacturer)
(EN
(EN
3
2
Horizontal use (falle on edgde possible)
Comply with the assembly direction of the lanyard
Lanyard end (4) is attached to
an anchorage point confor-
mity with standard EN 795.
After a fall, the energy absorber lanyard must be
decommissioned immediately .
(visible tearing of absorber)
)
Attach the end with an
absorber(3) to the back
D-link of the fall arrest
hamess in compliance
with standard EN361
9.9.2013 14:19