Connecting The Camera To A Computer Using The Cross Cable - LG LPT-DW113P Owner's Manual

Connecting the Camera to a
Computer using the Cross
Cable
When you turn the camera on for the first time, it will
need camera setting for the network.
1. Connect the camera to a computer using the
cross cable.
2. Connect the power source to the input terminal
on the camera.
3. Insert the plug of power cord into a wall outlet.
The camera will be turns on.
4. Turn on the computer and set the network con-
figuration of the computer as shown below.
1) Open the [Local Area Connection Properties]
windows.
2) Select the [Internet Protocol [TCP/IP]] and
click [Properties].
12
3) Select [Use the following IP address] option.
4) Click [Advanced] icon.
The [Advanced TCP/IP Settings] window is
displayed.
5) Click [Add...] icon of the [IP addresses]
option.
The [TCP/IP Address] window is displayed.
6) Enter the IP address and Subnet mask.
For example:
- IP address: 192 . 168 . 1 . n
(n: You can use the number from 0 to 255
except 0, 1 and 8. The number should be
different from the camera.)
- Subnet mask: 255 . 255 . 255 . 0