Access: Element - Smoke hollow ES230B Manual

Access: Element

Figure 1
Tool needed for access: Phillips head screwdriver. • Outils requis pour l'accès: tournevis cruciforme. • Herramienta nece-
saria para acceso: Destornillador en cruz.
DIRECTIONS:
• Turn the smoker off.
• Unplug the smoker from power source and allow to cool completely.
• Locate the access panel for the element on the back of the smoker. See Figure 1.
• Remove the six (6) screws and remove the access panel cover (Caution: sharp edges). See Figure 1.
• Carefully remove heat shrink from the female leads (A), disconnect from male spades (B) and then reconnect.
• NOTE: Some female lead terminals will require you to press a small release latch to disconnect from male
spades. See Figure 2.
• Re-install access panel to back of smoker.
34
A
Release
Latch
B
Figure 2