Advertisement
driVer inStallation
1. Insert the driver/user manual CD into the CD-ROM drive.
The setup program should be launched automatically.
Or, double-click "D:\setup.exe" (where "D:" is the path of
your CD-ROM drive) and follow the instructions.
2. Click "Finish" to exit the driver install wizard.
3. Connect the external display device (monitor/projector)
to the Hi-Speed USB 2.0 DVI Converter and switch the
display device on. Then plug the converter into an
available USB 2.0 port on your PC or notebook computer.
4. If installing only one Hi-Speed USB 2.0 DVI Converter,
select "Yes, I want to restart my computer now," click
"Finish," the proceed to Step 7 to complete the driver
installation. If installing more than one converter, proceed
to Step 5.
5. Select "No, I will restart my computer later" and click
"Finish" to continue installing additional converters as
instructed above.
6. To complete the driver installation, select "Yes, I want
to restart my computer now" and click "Finish" to restart
the computer.
7. After rebooting the computer, the extended display will
be shown on the display device.
4
Advertisement
