Presentations are made more compelling with another monitor for more impact or viewing speaker notes on a separate display. The MANHATTAN Hi-Speed USB 2.0 SVGA Converter supports resolutions of up to 1280 x 1024 in 16-bit or 32-bit color, and its 16 MB SdRAM memory easily enhances the workspace without complicated installations or expensive equipment.
Page 4
3. When the license Agreement screen displays, read it and select “I accept the terms of the license agreement.” Click “Next” to continue. 4. When the InstallShield Wizard Complete screen displays, select “Yes, I want to restart my computer now.” Click “Finish”...
Page 5
Driver Un-Install (2000/XP) 1. on the desktop, go to Start → Settings (Classic start menu) → Control Panel → Add or Remove Programs. 2. Select “USB 2.0 Graphics Card (Trigger) (driver version number)” and click “Remove.”...
3. disconnect the Hi- Speed USB 2.0 SVGA Converter and click “oK” to continue. 4. Select “Yes, I want to restart my computer now” and click “Finish” to reboot. After rebooting, the driver un-install procedure will be complete. indoWs ista 1.
Page 7
3. When the license Agreement screen displays, read it and select “I accept the terms of the license agreement.” Click “Next” to continue. 4. The Hi-Speed USB 2.0 SVGA Converter is configuring your new software installation..and is searching for installed features.
Page 8
6. After rebooting the computer, plug the Hi-Speed USB 2.0 SVGA Converter into an available USB 2.0 port on your PC or notebook. The extended display will be shown on the second display device. Verifying Driver Installation (Vista) On the desktop, right-click My Computer → Properties → Device Manager;...
Page 9
Driver Un-Install (Vista) 1. on the desktop, go to Start → Control Panel → Programs and Features. 2. Select “USB 2.0 Graphics Card (Trigger) (driver version number)” and click “Uninstall.” 3. disconnect the Hi- Speed USB 2.0 SVGA Converter and click “oK”...
Clicking the UVT icon also provides access to the Resolution options, which can be changed here or by going to display Properties/ Settings. NOTE: All Windows 2000/ XP/Vista resolution settings are formatted with a 4:3 aspect ratio except for 1280 x 1024, which is 5:4. (1024 x 768 is the best choice for viewing dVds.) Win Ce settings are also...
Page 11
Hi-Speed USB 2.0 SVGA Converter will now act as the primary Windows desktop. NOTE: Some display utilities and drivers found with certain AGP and built-in display adapters may prevent this option from working on some systems. You can disable the other utility program (usually in the same toolbar located on the bottom-right corner of the desktop) to make this function work properly.
Page 12
Following are some frequently asked questions — and answers — regarding the installation or operation of the Hi-Speed USB 2.0 SVGA Converter. Q: Why can’t I make the Hi-Speed USB 2.0 SVGA Converter the primary display? A: Some video card manufacturers include a utility that prevents other video cards from being set as the primary card.
operAtion tipS Following are some tips that may help if you are experiencing any difficulties using the Hi-Speed USB 2.0 SVGA Converter. Contact your dealer for additional assistance, if needed. • Check to make sure that all connectors are plugged in correctly. •...
SpeCifiCAtionS Standards and Certifications • Hi-Speed USB 2.0 • eHCI • Ce • FCC General • Chipset: MCT Trigger • display memory: 16 MB SdRAM • Bus-powered • Connections: USB type A male; Hd 15 female • Supports Suspend and Wake modes Supported resolutions •...