Advertisement
Thank you for purchasing the MANHATTAN
2.0 DVI Converter, Model 179133.
This quick install guide presents the rudimentary steps
required to set up and operate this device.* For detailed
instructions and specifications, refer to the user manual
1) on the CD enclosed with this product; 2) on the Web site
listed below; or 3) in some cases, printed and enclosed with
this product. Contact your MANHATTAN dealer with comments
or questions, or visit www.manhattan-products.com for
information on the latest software and firmware updates,
related products and additional contact information.
Important Pre-Installation Notes:
• Unplug any USB 2.0 VGA adapter connected to your PC
or notebook computer before executing the Hi-Speed
USB 2.0 DVI Converter setup or un-installation program.
• An AC power adapter is required for an external USB hub.
The driver allows up to six Hi-Speed USB 2.0 DVI
Converters on one PC.
• Connect the display device to the DVI connector of the
Hi-Speed USB 2.0 DVI Converter and switch the display
device on before plugging the converter into an available
USB 2.0 port of the PC or notebook computer.
• Do not reboot the computer until all converters are installed.
*
Some screen images have been modified to fit on page. Windows 2000/
XP screen images are shown; Vista/7 screen images are similar.
Hi-Speed USB
®
3
Advertisement
