Installation - Manhattan 158282 User Manual

SATA 300 to IDE Converter • User Manual
Thank you for purchasing the MANHATTAN
Model 158282. For specifications, go to www.manhattan-products.com.

Installation

1. Connect the Y-type power cable to the J1 connector and the PC
power supply.
2. Set the J3 jumper on IDE Master, Slave or Cable Select mode.
IMPORTANT: Set to Master mode when booting the device.
3. Attach the 22-pin SATA connector (P1) to the back of the SATA
device.
4. Connect the IDE cable to the 40-pin connector (J2) and the
motherboard IDE host.
J2
J1
J3
2
158282_02_man_ML1.indd 2
English
sata 300 to iDE converter,
®
English
P1
2/25/11 2:57:43 PM