Regular Maintenance - Martin Tracker Series Installation Manual

6.3
Interval
daily
weekly
after 30,000 hours of
operation (Power on
hours)
weekly
Refer to the
manufacturer's
documentation
Tab. 2: Maintenance table
© Martin Engineering GmbH

Regular maintenance

NOTE
If any noises occur or there is any other unusual response of the
guiding station, this must be put out of operation immediately. It
should be put into operation until this problem has been resolved
completely, since otherwise personal injuries or serious damage to
property may occur.
Maintenance part
Guide and deflection rollers Visual inspection of the rollers/
Conveyor belt centring
system
Bearings and rollers
Warning sticker
Support roller
replacement
Cleaning
Replace
Visual inspection of all warning
stickers / Clean all warning
stickers. Replace any warning
labels which are illegible. Warning
labels may be purchased from
Martin Engineering or an
authorised dealer
Replace
35
Measure
M3625UK-10/15