Installing The Martin ® Tracker Conveyor Belt Centring System (Upper Unit) - Martin Tracker Series Installation Manual

5.2.3
Fig. 14: Assembling the trough roller station / roller station holder
© Martin Engineering GmbH
Installing the MARTIN
(upper unit)
NOTE
If possible, remove the conveyor belt to create space for the instal-
lation.
NOTE
In the following step, keep the dismantled trough roller station
available since it would still be needed in the course of the installa-
tion.
1. Remove the existing trough roller station (1, Fig. 14) available
in the conveyor system.
1
2. Fix the trough roller station to the roller station holder (2, Fig.
14) of the tracker with screws or by welding it.
®
Tracker conveyor belt centring system
2
23 M3625UK-10/15