Product Description; Design And Function - Martin Tracker Series Installation Manual

3
3.1
© Martin Engineering GmbH

Product Description

Design and Function

®
The MARTIN Tracker conveyor belt centring system, hereinafter
referred to as tracker, detects skewing in the conveyor belt move-
ment automatically and corrects it permanently. Slight contact of the
conveyor belt against the guide roller enables accurate correction.
The adjustment rod transfer the movements of the guide rollers to
the control rollers and thus enables accurate guidance of the con-
veyor belt.
The upper unit is placed on the support side of the conveyor belt and
the lower unit on the return side.
This installation manual describes the installation of the MARTIN
Tracker conveyor belt centring system for the models, Mini, Basic,
Heavy-duty and Monster..
NOTE
A product that has not been installed properly or correctly may dis-
rupt the conveyance process and contaminate the bulk material to
be transported.
The operator is therefore responsible for implementing the neces-
sary counter measures.
When using with contaminants Martin Engineering or a represent-
ative can help with the positioning or customized solutions.
9
®
M3625UK-10/15