Table of Contents
Advertisement
Precautions
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Do not attempt to disassemble this camera.
To prevent electric shock, do not remove cover. There are no user-serviceable parts
inside. Refer servicing to qualified service personnel.
Do not expose this camera to rain or moisture.
Do not face this camera towards the sun, extreme bright light or light reflecting objects.
Even when this camera is not in use, put the supplied lens cap on the lens mount.
Handle this camera with the maximum care.
Operate this camera only from the type of power source indicated on the camera.
Power-off the camera during any modification such as changes of jumper-line and
jumper-register.
To connect with or disconnect from CCU, do not hold the camera cable in order to
protect from wire-break and short-circuited.
Do not put excessive pressure on the camera cable.
When you connect the camera cable with CCU, please make sure that the pin-guide is
set in right manner to avoid damage on the connector pins.
Power off the camera when you connect or disconnect the camera cable.
USER'S RECORD
The production serial number are
shown on the bottom of camera
Model Name :
Serial No. :
CV-M2000 series
Advertisement
Table of Contents
