For PL-X920 Series Units
1) Unscrew the four (4) attachment
screws used to secure the rear
maintenance cover and half
cover in place.
Remove the rear main-
tenance cover first,
then the half cover.
2) Pivot the half cover open and lift
up slightly to free the guide tabs.
Next, remove the half cover.
3) Remove the rear maintenance
cover.
Refer to your PL unit's User Manual for information about removing the
Rear Maintenance Cover.
Half Cover
Rear Maintenance
Cover
Half Cover
-3-
PL-X920 Series, 2 slot type
Guide Tabs