Advertisement
Please check that the following items are all included in your package.
DIM Module
Pro-face has taken the utmost care to insure the quality of this product when it was
shipped, however, should for any reason problems or damage have occurred during
shipping, please contact your Pro-face representative immediately for service.
Removing the Cover
1
Be careful when removing the rear maintenance cover for PL-5900/PL-
5910/PL-X920 Series Units. It is made from aluminum and is easily
bent.
For PL-5900/PL-5910 Series Units
1) Unscrew the four (4) attachment
screws used to secure the rear
maintenance cover and half cover
in place.
2) Remove the rear maintenance cover
by lifting the cover in the direction
shown.
Package Contents
(1)
Rear Maintenance
Cover
-2-
Installation Guide (This Guide)
Installation
Guide
Advertisement
