Power On And Confirm Gps Reception - Humminbird AS GR50 Installation Manual

NOTE: See your device installation guide to identify the NMEA In wire. The
device will connect to the white wire or green wire, depending on its NMEA
communication requirements (IN or GP).
NOTE: See Section 5: Turn on NMEA Output and Confirm the Baud Rate for
more information.
WARNING! It is important to finish all installation connections before
powering on the control head.

4. Power on and Confirm GPS Reception

Follow the instructions below to power on your Humminbird® control head.
HELIX Series
1. Press the
2. When the Title screen is displayed, press the MENU key to access the
Start-Up Options Menu.
3. If a functioning transducer is connected, Normal operation will be
selected automatically, and your Fishing System can be used on the
water. See your control head operations manual for more information.
GPS Diagnostic View
POWER/LIGHT key.
19 Installation