Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
HPP18E FLEX
Hydraulic Powerpack
From serial No. 4708
Revised
13.04.2011
Prior to Operation
We thank you for choosing a
HYCON powerpack.
Please note that the powerpack
is delivered without hydraulic
oil, and therefore it must be
filled up with hydraulic oil prior
to operation.
To ensure smooth operation
and long-lasting performance of
your new powerpack, we
recommend that you study this
operating manual carefully and
pay special attention to the
Safety and Service
Precautions
We hope you will be satisfied
with your new HYCON power-
pack.
Best regards
HYCON A/S
HYCON A/S
Juelstrupparken 11
DK-9530 Støvring
Denmark
Tel: +45 9647 5200
Fax: +45 9647 5201
Mail
hycon@hycon.dk
www.hycon.dk
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HYCON HPP18E FLEX
Summary of Contents for HYCON HPP18E FLEX
- Page 1 DK-9530 Støvring Denmark pay special attention to the Tel: +45 9647 5200 Safety and Service Fax: +45 9647 5201 Precautions Mail hycon@hycon.dk www.hycon.dk We hope you will be satisfied with your new HYCON power- pack. Best regards HYCON A/S...
-
Page 2: Table Of Contents
Contents Page Safety precautions .................... 2 Filling up hydraulic oil ..................2 Technical data ....................3 Electrical Circuit Diagram .................. 4 Starting instructions ..................5 Service, maintenance and hydraulic settings ............6 Oil types ......................6 EC-Declaration of Conformity ................7 Warranty conditions .................. -
Page 3: Safety Precautions
Safety Precautions 1. Always use protective earplugs even though the powerpack has a low noise level. 2. Always connect hoses before starting. 3. Always keep electric box, cables and sockets clean. 4. In case of non-operation or performance of service, always turn off the motor. 5. -
Page 4: Technical Data
Technical data The HYCON HPP18E FLEX open centre powerpack is an advanced hydraulic power source, which regulates the revolutions of the motor and thereby the oil flow supplied by means of a built in frequency converter. The powerpack therefore covers as much as three EHTMA-categories (C, D and E) with an output of 20, 30 and 40 l.p.m. -
Page 5: Electrical Circuit Diagram
Electrical Circuit Diagram HPP18E FLEX (11 kW) Control Circuit Frequency Converter... -
Page 6: Starting Instructions
Starting Instructions Please observe the starting instructions on the electric box. • • • • Check hydraulic oil level at sight glass Start: • Connect hoses and tool • Press the green button • Move the lever to ”ON” • • • • Move the lever to “OFF“ Stop: •... -
Page 7: Service, Maintenance And Hydraulic Settings
Is the pressure/oil flow then still incorrect, the pump is defect and must be replaced. Oil Types The HYCON powerpacks use standard hydraulic oil, i.e. all types of mineral oil and biodegradable oil, which comply with the following values: Recommended viscosity... -
Page 8: Ec-Declaration Of Conformity
Tel: +45 9647 5200 Fax: +45 9647 5201 Mail hycon@hycon.dk www.hycon.dk We hereby declare that HPP18E FLEX hydraulic powerpack – from serial No. 4708 (with 11 kW electric motor) is manufactured in conformity with the EC directives: 2006/42/EC 2000/14/EC 2006/95/EC... -
Page 9: Warranty Conditions
Warranty Conditions We grant 12 months warranty from the first date of operation – however, not more than 18 months from the date of delivery. The warranty applies to faults that can be related to construction and production errors. Faults caused by incorrect operation, incorrect handling, lack of maintenance or the like will not be accepted as warranty.
Need help?
Do you have a question about the HPP18E FLEX and is the answer not in the manual?
Questions and answers