HYCON HPP18E FLEX Operating Manual

Hydraulic power pack
Hide thumbs Also See for HPP18E FLEX:

Advertisement

Quick Links

Operating Manual
HPP18E FLEX
Hydraulic Power pack
From serial No. 12924
Revised
08.11.2018
Prior to Operation
We thank you for choosing a
HYCON power pack.
Please note that the power
pack is delivered without hy-
draulic oil. Therefore it must be
filled with hydraulic oil prior to
operation.
To ensure smooth operation
and long-lasting performance of
your new power pack, we
recommend that you study this
operating manual carefully and
pay special attention to the
Safety and Service
Precautions
We hope you will be satisfied
with your new HYCON power
pack.
Best regards
HYCON A/S
HYCON A/S
Juelstrupparken 11
DK-9530 Støvring
Denmark
Tel: +45 9647 5200
Fax: +45 9647 5201
Mail
hycon@hycon.dk
www.hycon.dk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HPP18E FLEX and is the answer not in the manual?

Questions and answers

Summary of Contents for HYCON HPP18E FLEX

  • Page 1 Safety and Service Precautions We hope you will be satisfied HYCON A/S with your new HYCON power Juelstrupparken 11 DK-9530 Støvring pack. Denmark Best regards Tel: +45 9647 5200...
  • Page 2: Table Of Contents

    Contents Contents ........................1 Safety Precautions ......................2 Filling of Hydraulic Oil ..................... 3 Technical data ....................... 4 Electrical Circuit Diagram ....................5 Starting Instructions ....................... 6 Service, Maintenance and Hydraulic Settings ..............7 Oil Types ........................7 EC-Declaration of Conformity ...
  • Page 3: Safety Precautions

    It is recommended to use a crane when lifting the power pack. The pressure relief valve is set at 160 bar / 2320 psi from the HYCON plant. Never set it higher.
  • Page 4: Filling Of Hydraulic Oil

    Filling of Hydraulic Oil  To fill up with hydraulic oil, loosen the filter cover on top of the power pack.  Remove the filter element (see photo), and fill up with oil. When oil is showing at the bottom of the filter unit, there is enough oil on the power pack.
  • Page 5: Technical Data

    The power pack covers four different flow outputs of 20, 30, 40 and 46 LPM / 5, 8, 10 and 12 GPM respectively at 120 bar / 1740 psi. This HYCON power pack is fully compatible with and sufficient for the common European and North American tools.
  • Page 6: Electrical Circuit Diagram

    Electrical Circuit Diagram...
  • Page 7: Starting Instructions

    Starting Instructions WARNING: Before start up, ensure all conditions under Safety precautions are full filled. Please observe the starting instructions on the frequency converter box. Start:  Check hydraulic oil level at sight glass  Connect hoses and tool  Turn the “0 / 1”...
  • Page 8: Service, Maintenance And Hydraulic Settings

    Oil Types The HYCON power packs use standard hydraulic oil, i.e. all types of mineral oil and biodegradable oil, which comply with the following values: Below 10°C 10 …...
  • Page 9: Ec-Declaration Of Conformity

    Guaranteed sound power level: L 98 dB HYCON A/S Juelstrupparken 11 DK-9530 Støvring Denmark Martin Møller Managing Director 18.05.2018 ) Note that only the HPP18E FLEX EU model with maximum 40 LPM / 10 GPM is embraced by this conformity.
  • Page 10: Warranty Terms

    Warranty Terms We grant 12 months warranty from the first date of operation – however, not more than 18 months from the date of delivery. The warranty applies to faults that can be related to construction and production errors. Faults caused by incorrect operation, incorrect handling, lack of maintenance or the like will not be accepted as warranty.

Table of Contents