Advertisement
HPP09
Hydraulic Powerpack
From serial
number 1188-1278
Revised
December 2003
Prior to Operation
We thank you for choosing a
HYCON powerpack.
Please note that the power-
pack is delivered without hy-
draulic oil, and therefore it
must be filled up with hydrau-
lic oil prior to operation.
To ensure smooth operation
and long-lasting performance
of your new powerpack, we
recommend you to study this
operating manual carefully and
pay special attention to the
Safety and Service
Precautions
We hope you will be satisfied
with your new HYCON power-
pack.
Best regards
HYCON A/S
HYCON A/S
Vester Hassingvej 33
DK-9320 Hjallerup
Denmark
Tel: +45 9647 5200
Fax: +45 9647 5201
Mail
hycon@hycon.dk
www.hycon.dk
Advertisement
Table of Contents
Related Manuals for HYCON HPP09
Summary of Contents for HYCON HPP09
- Page 1 Vester Hassingvej 33 DK-9320 Hjallerup Denmark Safety and Service Precautions Tel: +45 9647 5200 Fax: +45 9647 5201 Mail hycon@hycon.dk We hope you will be satisfied www.hycon.dk with your new HYCON power- pack. Best regards HYCON A/S...
-
Page 2: Table Of Contents
Contents Page Safety precautions.................... 2 Technical data....................3 Starting instructions ..................4 Service, maintenance and hydraulic settings ............4 Oil types ......................5 EC-Declaration of Conformity ................6 Warranty conditions ..................7 Spare parts list ....................8... -
Page 3: Safety Precautions
Safety Precautions 1. Always use protective earplugs. The powerpack complies with the EU noise limits of max. 104 dB, but by daily long-lasting operation there is a risk of hearing de- fects. 2. Always connect hoses before starting. 3. Never add fuel and oil when the engine is running. 4. -
Page 4: Technical Data
Technical Data Hydraulics The HYCON HPP09 open centre hydraulic powerpack is designed in accordance with the EHTMA category C, which prescribes a minimum performance of 20 l.p.m. at 138 bar. The HYCON powerpack is fully compatible with and sufficient for the common European tools. -
Page 5: Starting Instructions
Starting Instructions Please observe the starting instructions on the front of the powerpack. Start: • • • • Check engine oil level • Check hydraulic oil level at sight glass • Connect hoses and tool • Switch fuel tap to “ON” •... -
Page 6: Oil Types
Oil Types The HYCON powerpack uses standard hydraulic oil, i.e. all types of mineral oil and biodegradable oil, which comply with the following values: Recommended viscosity... -
Page 7: Ec-Declaration Of Conformity
Fax: +45 9647 5201 Mail hycon@hycon.dk www.hycon.dk From Serial No. We hereby declare that the HPP09 hydraulic powerpack 1188-1278 (with 6.6 kW petrol engine) is manufactured in conformity with the EC Directives 98/37/EC and 2000/14/EC. Notified Body 404: SMP Svensk Maskinprövning AB... -
Page 8: Warranty Conditions
Warranty Conditions We grant 12 months warranty from the first date of operation – however, not more than 18 months from the date of delivery. The warranty applies to faults that can be related to construction and production errors. Faults caused by incorrect operation, incorrect handling, lack of maintenance or the like will not be accepted as warranty.
Need help?
Do you have a question about the HPP09 and is the answer not in the manual?
Questions and answers