Operational Anomalies; After Sales Service - DeDietrich DHD1103 X Manual To Installation

5/ OPERATIONAL ANOMALIES

SYMPTOM
The hood does not
work...
The hood has low
output...
The hood stops
operating whilst
functioning.

6/ AFTER SALES SERVICE

Any maintenance on your equipment should be undertaken by:
- either your dealer,
- or another qualified mechanic who is an authorized agent for the brand appliances.
When making an appointment, state the full reference of your equipment (model, type and
serial number). This information appears on the manufacturer's nameplate attached to your
equipment.
Check that:
• There is not a power outage.
• A specific speed has actually been selected.
• The red reset key positioned above the electrical installation box is
pressed.
• Check that the leads are well inserted into the nine-pole connector
(too much pressure when making the connections could bend the
contacts).
Check that:
• The motor speed selected is sufficient for the quantity of fumes
steam present.
• The kitchen is ventilated well enough to allow for air intake.
• The charcoal filter has not been used (filtering mode version).
• The air outlet conduit is unobstructed and conforms to paragraph 2.
Check that:
• There is not a power outage.
• The single-pole contactor breaker switch has not tripped.
SOLUTION
32
EN
EN