Automatic Switch-Off/Economy Mode; Taring Weight Display (Net) - Seca 375 Instruction Manual And Guarantee

– To change the weighing range, press
the key .
– The or
indicate which weighing range is cur-
rently active. This weighing range re-
mains activated even after the scales
are switched off.

Automatic switch-off/economy mode

To save power, when run on a battery the scales switch off after a short period without a
load present on the scales. In mains operation, the scales remain switched on permanent-
ly.

Taring weight display (NET)

The tare function is useful if an additional weight (such as cloths or a pad on the weighing
surface) are to be ignored in the weighing result. Proceed as follows:
– Place the additional weight on the scale
and press the button NET.
The note "NET" appears.
– Wait until the display stops flashing and
0. 0 00
shows .
– You can now perform as many weigh-
ing operations as you like with this addi-
tional weight.
– TARA is deactivated by pressing the
button NET once again, or by switching
the scales off.
Important!
The maximum additional weight is 7.5 kg (weighing range 1, model 376), 10 kg (model
375) and 15 kg (weighing range 2, model 376). The maximum weight which can be dis-
played is reduced by the weight of the objects already placed on the scale.
Model 375/376
symbols in the display
seca 375:
seca 375:
seca 376:
seca 376:
GB 17