Operation; Correct Weighing - Seca 375 Instruction Manual And Guarantee

– Align the scale by undoing the foot
screws. The air bubble in the spirit level
must be right in the centre of the circle.
– Ensure that only the feet of the scale are
in contact with the floor. The scale may
not be in contact at any other point.

5. Operation

Correct weighing

– Press the green START key.
SE(A 88888
, and
secutively in the display. The scale is
then automatically set to zero and ready
for use.
– If required, switch the weighing range
(see page 16).
– Place the baby on the scale.
– Read the weighing result off the digital
display.
– To switch off the scale, press the Start
key again.
If the scale is operated with a mains unit,
the symbol appears in the display.
Toggling between weighing ranges (only with Model 376)
The seca 375/376 has two weighing ranges which can be selected. Weighing range 1
has a reduced maximum capacity but greater display resolution, whilst weighing range 2
allows you to use the maximum load capacity of the scale. Depending on the application
in question, you decide whether you would prefer to use the fine display resolution or the
high load range.
– Switch on the scale at the green Start
key. The scale initially operates in the
weighing range last selected.
16
0. 0 00
appear con-
seca 375:
seca 376: