Exit Menu - Xycom XVME-654 Manual

Option
VMEbus ACFAIL ANMI
VMEbus SYSFAIL ANMI
VMEbus BERR ANMI
VMEbus IRQ1-IRQ7

Exit Menu

This menu prompts you to exit setup.
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced
Save Changes & Exit
Exit without Saving Changes
Get Default Values
Load Previous Values
Save Changes
↑↓
F1 Help
←→ Select Menu
ESC Exit
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table Chapter 3 -13. Interrupt Signals Sub-menu Options
Description
Determines whether the auxiliary non-maskable interrupt (ANMI) is enabled
on power-up for a power failure. The default is disabled.
Determines whether the auxiliary non-maskable interrupt (ANMI) is enabled
on power-up for a system failure. The default is disabled.
Determines whether the auxiliary non-maskable interrupt (ANMI) is enabled
on power-up for a VMEbus error. The default is disabled.
Determines which of the VMEbus auxiliary maskable interrupt (AMI) levels
(1-7) can be received by the XVME-654. Each interrupt level can be enabled
or disabled individually. All are disabled by default.
Security
Select Item -/+
Enter Select » Sub-Menu
Figure Chapter 3 -15. Exit Menu
Chapter 3 – BIOS Setup Menus
VMEbus Exit
Item Specific Help
If the item you
are viewing has
specific help, it will
be listed here.
Change Values F9
F10 Previous Values
Setup Defaults
3-23