Reading The Display During Treated Water Flow - Amway eSpring 10-0185-CA Owner's Manual

R E A D I NG T HE DI S PL AY D URI NG TRE ATE D WATER FL OW
STATUS
Normal display
Top Shroud removed
(Reseat for display)
Cartridge not recognized
Lamp malfunction
Under 10% Cartridge life
remaining
End of Cartridge life
Water Purifier
needs servicing
Water Purifier
malfunction
Blank display
No rolling water drops
6
EL EC TR O N I CS D IS P LAY
The Electronics display on the eSpring
usage (gallons/litres) and when the Cartridge was installed. When properly plugged into
an electrical outlet, the Water Purifier will display its status via the Electronic Module
LED display.
WATER CUP CARTRIDGE
DROPS ICON ICON
Blue Blue Blue
Blue Red* Blue
Blue Red* Off
Blue Red* Blue
Blue Blue Blue
Blue Red* Flashing
Blue Off Off
Flashing/
Flashing Flashing
Red*
Off Off Off
Not blue,
Off Blue
not moving
® Water Purifier keeps track of actual water
LIFE
BEEPER PHONE
INDICATOR
Blue Off Off
Blue Repeated Off
Off Repeated Off
Blue Repeated Red*
Last
Once at
segment Off
flow start
flashing
Every 2
Off
Off
seconds
Off Repeated Red*
Constant Flashing/
Flashing
tone Red*
Off Off Off
Blue Off Off
COMMENTS/ACTIONS
Normal
Cup icon On/Red –
Do not operate, replace Top Shroud
Install Cartridge – Light On/Red
Cup icon On/Red
Phone icon On/Red;
Need replacement Cartridge
Order replacement Cartridge
Install Cartridge – Light On/Red
Cup icon; Phone icon
Need new Electronic Module
Call Customer Service
Phone icon On/Red. All other segments flashing
Unplug immediately. Wait 5 minutes. Plug back in and run
treated water. If unsuccessful, call Customer Service.
Plug in unit or wait for power to return.
No UV treatment - Normal display does not
change when treated water flows. Sensor
malfunction. Call Customer Service.