Transport, Storage And Cleaning - Johannus LiVE 2T-A User Manual

Table of Contents

Advertisement

1.4

Transport, storage and cleaning

Pay attention to the following during transport and storage:
Remove the music desk and the pedal board from the organ, before
transport.
Store in an area with 40% to 60% relative humidity.
Do not store in area's e.g. baths, washrooms, on wet floors, expose to
steam or smoke, salt, humid, rain, moisture, dusty or sandy locations.
Minimum temperature within the storage area: 0°C
Do not expose the Organ to direct sunlight (UV), do not place it near
devices that radiate heat, or otherwise subject to temperature extremes.
Also, do not allow lighting devices that normally are used while their light
source is very close to the Organ (such as a piano light), or powerful
spotlights to shine upon the same area of the Organ for extended periods
of time. Excessive heat can deform or discolor the Organ.
Do not allow rubber, vinyl or similar materials to remain on this Organ
for long periods of time. Such objects can discolor or otherwise harmfully
affect the finish.
Do not paste stickers, decals, or the like to this instrument. Peeling such
matter off the instrument may damage and or discolor the exterior finish.
Do not bend the power cord or place heavy objects on it.
Don't allow foreign objects or liquids to enter Organ;
Never place containers with liquid on Organ; Do not put anything that
contains water on this Organ. Also, avoid the use of insecticides,
perfumes, alcohol, nail polish, spray cans, etc., near the Organ. Swiftly
wipe away any liquid that spills on the Organ using a dry, soft cloth. Never
use benzene, thinners, alcohol or solvents of any kind, to avoid the
possibility of discoloration and/or deformation.
Unplug the power cord from the outlet before cleaning. Before cleaning
the Organ, turn it off and unplug the power cord from the outlet.
To clean the Organ, use a dry, soft cloth; or one that is slightly dampened.
Try to wipe the entire surface using an equal amount of strength, moving
the cloth along with the grain of the wood. Rubbing too hard in the same
area can damage the finish.
Do not open. Do not disassemble or modify by yourself
Avoid climbing on top of the Organ, or placing heavy objects on it, nor on
top of the keyboard nor pedal board. This can be the cause of
malfunction, such as keys ceasing to produce sound.
Do not bend, drop, strong shock or vibration.
Never strike or apply strong pressure to the display.
Cautions when moving this Organ: Since this product is very heavy, you
must make sure that a sufficient number of people are on hand to help, so
you can lift and move it safely, without causing strain. Make sure to have
a firm grip, to protect yourself from injury and the instrument from
damage. If you need to move the instrument, consult with your retailer,
or Johannus Orgelbouw B.V.
User Manual LiVE 2T-A / LiVE 3T-A (AGO)
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Live 3t-a

Table of Contents