Lamax W9 Action Camera; Turning The Camera On And Off; Battery Installation; Charging - LAMAX W9 User Manual

1

LAMAX W9 ACTION CAMERA

On/Off button to turn the camera on and off.
A
Shutter/Button to start/stop the video.
B
Access to USB-C and micro HDMI connectors.
C
Access to battery compartment and microSD card slot.
D
2

TURNING THE CAMERA ON AND OFF

> To turn on the camera for the first time or after removing the battery, press and hold
the "mode" button for 3–5 seconds.
When switching on again, turn on the camera by pressing the "mode" button once.
>
> Turn the camera off by pressing and holding the "mode" button for 3–5 seconds.
3

BATTERY INSTALLATION

Press the lock button at the bottom of the camera and slide the door out. The door
A
can then be opened.
Insert the battery into the slot with the battery and camera connectors on the same
B
side.
Close the door again.
C
4

CHARGING

You can charge the camera by connecting it to a computer via a USB cable or using
>
the AC adapter.
NOTE: AC adapter not included.
> Charging current when charging via USB and AC adapter is 580 mA. When the com-
puter's output current is 400 mA, charging through the computer's USB port will also
be 400 mA.
5

INSERTING THE MICRO SD CARD

> Insert and remove a microSDHC or SDXC card from the microSD card slot when the
camera is turned off and not connected to the computer. Memory cards with a higher
write speed (UHS Speed Class – U3 and higher) are recommended.
NOTE: Use only microSDHC or SDXC cards from reputable manufacturers. Generic
cards don't guarantee proper behaviour of the data storage.
6

CHANGING THE CAMERA MODE

To change the camera mode, touch the
>
desired mode.
or swipe your finger up to select the
| 5