Advertisement
SWX EX12, SWX EX22
Fitting of the wall bracket
1. Remove the eight screws indicated by the arrows in photo 1.
2. Install the brackets with the cable attachment holes toward the fan motor connection cable, as shown in photo 2.
Use Loctite 2400 or similar to lock the screws.
Photo 1
3. The fan heater may be mounted with the pipes facing left or right, as seen from the front, as shown in photo 3 and 4. In
rooms with high ceilings, the fan heater should be installed in a low position, but not so low that it intrudes on the working
space. For a fan heater wall bracket hole drilling template with the min. distances from the wall or ceiling, see appendix B.
Photo 3
4. The fan heaters are delivered with the air deflector fitted for mounting as in photo 3.
If the fan heater is mounted with the pipes facing right, the air deflector must be turned for the air to be
deflected downward. Remove the six screws (1/4" hex head) attaching the air deflector as shown in photo 5,
lift out the air deflector and turn it 180°. Then reattach it.
Photo 5
Photo 2
Photo 4
13
Advertisement
