Atag Teppan YakiTY3011M Instructions For Use Manual page 122

INSTALLATION INSTRUCTIONS
2. The control box can be fi xed to worktops with a maximum
thickness of 40 mm (including the plank used to fi x the
control box). If the worktop (including the plank) at the
position of the control knobs is thicker than 40 mm, refer
the illustration above to create a cut-out in the bottom of
the worktop. Measure the thickness of the worktop and, if
necessary, create this cut-out in the worktop.
Silicon sealing ring
Thickness
(worktop + plank) < 40 mm
in area P x Q
EN 26
Top-stone contents