Atag Teppan YakiTY3011M Instructions For Use Manual page 104

USE
Switching on
zero position
Switching off
Residual heat
Switching on
Press the knob of the desired zone as far as it will go. Then turn
it clockwise to set the right temperature. The light ring turns
red to indicate that the zone is warming up. When the zone has
reached the temperature set, the ring turns green: the appliance
is ready for use.
Always turn the knob anticlockwise to return to the zero setting.
You cannot reach the zero setting by turning the knob clockwise.
After the knob has sprung forward again, the safety lock is
activated.
Please remember that it takes some time for the teppan yaki to
cool down after switching off.
EN 8
Switching on and off contents
Switching off