Reset Tv; System Information - Toshiba REGZA XV*** User Manual

Software upgrade, licences, system
Auto Upgrade
If Auto Upgrade is set to On the software will
automatically upgrade as each version becomes available,
provided the television is on or in standby.
In the SETUP menu press
1
Software Upgrade and press OK.
Press or to select Auto Upgrade.
f e
2
Software Upgrade
Auto Upgrade
Search for New Software
Use or to select On or Off.
z x
3
Searching for New Software
If preferred, software upgrades can be searched for
manually using Search for New Software.
In the Software Upgrade menu press
1
select Search for New Software. Press OK.
The television will automatically start searching
for a software upgrade, the progress bar will
move along the line.
SEARCHING FOR NEW SOFTWARE
Searching for a new software upgrade for this TV.
Searching
If an upgrade is found the television will
automatically start downloading, if not a screen
will appear stating that an upgrade is
unavailable.
information, reset TV
or to select
f e
On
to
e
The licences for the software used in this television are
available for viewing on screen.
In the SETUP menu press
1
Software Licences and press OK.
A screen will appear displaying all the licensing
information required for the televisions software.

System Information

This feature can be used to check the version of software
currently installed. In DTV mode it includes additional
diagnostic information such as signal strength, signal
From the SETUP menu press
1
System Information.
Press OK to display the System Information.
2
Selecting Reset TV will delete all television
settings/features, including stored channels, returning the
television to the original factory set up.
In the SETUP menu press
1
highlighted.
Press OK to select. A screen will appear warning
2
that all previous settings will be lost, press
or
z x
continue.
The television will switch off then back on again
and the Quick Setup screen will appear. Press
OK to continue (see 'Quick Setup' section).
40
Software Licences
or
f e
quality, frequency etc.
or
f

Reset TV

until Reset TV is
e
to select Yes or No, then press OK to
to select
to select
e