Using The Remote Control - Toshiba REGZA XV*** User Manual

Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
POWER switch
(Full Power
Down Option)
ORANGE LED – Programme Timer Set (digital only)
RED LED – Programme Timer Active (digital only) (LED 3)
GREEN
Switching On
If the RED LED is unlit check that the mains plug is
connected to the power supply and press the
button on the left side of the television. If the picture does
not appear press on the remote control, it may take a
i
few moments, the GREEN
To put the television into Standby press
control. To view the television press
may take a few seconds to appear.
NOTE: When the television is put into standby it will
automatically search for updates if Auto Channel
Update has been activated.
I
When the / POWER switch is turned off, the digital
i
channel position you previously viewed may not be
memorised in the television memory.

Using the Remote Control

Press the MENU button on the remote control to see
the menus.
The menu appears as a list of five topics. As each symbol is
selected by pressing or
z
remote control, its respective options will appear below.
IMPORTANT: At the bottom of the screen will be a bar
displaying a selection of control functions, i.e. Select,
Watch, Back, Watch TV.
Using the Controls
LED – On Timer Set (LED 2)
I
/ POWER
i
LED will be lit.
on the remote
i
again. The picture
i
on the navigation ring on the
x
Standby
SD Card slot
allows access
to photo files
RED LED – Standby
GREEN LED – Power on (LED 1)
COMMON INTERFACE
The Common Interface is for a Conditional Access
Module (CAM). Contact a service provider.
NOTE: The same menu is displayed in DTV (Digital TV)
and ATV (Analogue TV) modes, however, where some
items are not available in a mode they will appear
greyed out.
To use the options press the
remote control to move up and down through them and
OK, ord
z
screen instructions. The functions of each menu are
described in detail throughout the manual.
To alter the volume press —
To alter the programme position press
Press MENU and S , R , Q or P to control the sound and
picture options. Press MENU to finish.
When connecting sound equipment to EXT3, connect the
audio output of the equipment to the phono sockets on the
television.
To select the external input, press
required input source. See page 50.
Please always refer to the owner's manual of the
equipment to be connected for full details.
NOTE: Interactive video games that involve shooting a
'gun' type of joystick at an on-screen target may not work
with this television.
14
RETURN
OK
and
f e
to select the required choice. Follow the on
x
Using the Controls
+
j .
B
USB JPEG VIEWER
This socket has limited
functionality and
Toshiba can take no
responsibility for
damage to other
connected equipment.
HDMI4 INPUT
(Model dependant)
INPUT 3
(EXT3)
Headphone jack
button on the
.
e e f f
F
and select the