Input Selection And Av Connections - Input Selection, External Input Skip, Input Signal Selection, Pc Audio - Toshiba REGZA XV*** User Manual

Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7
for a clear view of the back connection recommendations.
Most media recorders and decoder send a signal through
the SCART lead to switch the television to the correct
Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
B
This button must be used to view equipment connected
using the COMPONENT VIDEO INPUT (EXT3C).
An S in the display e.g.
B
input is set for an S-Video signal.
Input Selection
At any time by pressing
1
screen showing modes and all stored external
equipment. Use
e
to select.
Pressing B on the
remote control
Inputs
TV
B
1
B
2
B
3C
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
* HDMI4 is model dependant
HDMI displays equipment connected to HDMI on
the back and side of the television.
PC displays a computer connected to RGB/PC on
the back of the television.
External input skip
This feature makes input selection more convenient.
B
Press to select the external input to be
1
skipped (i.e. 1,
B
Input selection and
AV connections
2S (EXT 2S), indicates the
B a list will appear on
or to highlight and OK
f
Pressing B on the
TV side panel
Inputs
DTV TV
DTV RADIO
DTV TEXT
B
1
B
2
B
3C
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
ATV
2 or 3C).
B B
In the SETUP menu press
1
Manual Settings, then press OK.
Use
x
2
Press EXIT. The skipped input will now be greyed
out on the Input list and will be skipped over
B
when
INPUT Signal Selection
This specifies the type of signal going into SCART 2 (EXT2)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SETUP menu press
1
AV connection is highlighted, then press OK.
With
z
2
required input for EXT2.
AV Connection
PC/HDMI1 Audio
HDMI1 Audio
HDMI Settings
EXT2 Input
Woofer
Digital Audio Output
If the colour is missing try the alternative setting.
To receive sound from a connected PC, plug the audio
cable into the back of the television (see 'Connecting a
computer' section), then use the PC/HDMI1 Audio setting.
In the AV connection menu press
1
PC/HDMI1 Audio.
Use to
2
NOTE: Selecting the PC option will force HDMI
into digital audio.
50
to highlight
e
to select Skip then or
e f
Manual Settings
Man
Skip: On
ual
Setti
EXT2 A
is pressed to go through the list.
until
e
or select either AV or S-VIDEO as the
x
PC Audio
or select the PC option.
z x
to select On.
PC
Digital
AV
Internal
PCM
to highlight
e