Picture Controls - Active Vision M100, Film Stabilization, Expert Mode, Reset; Film Stabilization - Toshiba REGZA XV*** User Manual

Picture controls (continued)
Active Vision M100
The Active Vision M100 feature can reduce picture
blur and/or judder without altering image brightness or
adding flicker.
In the Advanced Picture Settings menu press
1
to highlight Active Vision M100.
e
Advanced Picture Settings
Colour Temperature
Auto Brightness Sensor Settings
Active Backlight Control
Black/White Level
Static Gamma
Noise Reduction
Resolution +
Active Vision M100
Press or to select On or Off.
z x
2

Film Stabilization

The Film Stabilization feature allows the adjustment
of motion smoothness.
In the Advanced Picture Settings menu press
1
to highlight Film Stabilization.
e
Advanced Picture Settings
Auto Brightness Sensor Settings
Active Backlight Control
Black/White Level
Static Gamma
Noise Reduction
Resolution +
Active Vision M100
Film Stabilization
Press or to select between Standard, Off
z x
2
or Smooth.
NOTE: If Picture Mode is set to AutoView this
feature will also have Auto mode.
On
0
0
On
On
0
0
On
Standard
Expert Mode allows the Red, Green and Blue colours to
be switched on and off and individually adjusted.
In the Advanced Picture Settings menu press
1
to select Expert Mode then press OK.
e
Advanced Picture Settings
Active Backlight Control
Black/White Level
Static Gamma
Noise Reduction
Resolution +
Active Vision M100
Film Stabilization
Expert Mode
Press
e
2
to select On. Set the other colours to Off.
Expert Mode
Red
Green
Blue
Colour
Tint
Press
3 e
adjust.
NOTE: If Picture Mode is set to AutoView this
feature will not be selectable.
Using Reset will return Advanced Picture Settings back
In the Advanced Picture Settings menu press
1
to select Reset.
e
A confirmation screen will appear. Press
2
to select Yes or No. Press OK.
31
Expert Mode
0
0
Standard
or to select a colour and then
f
0
0
to select Colour or Tint then
Reset
to the factory settings.
On
On
or
z x
On
On
On
or to
z x
or
z x