Resolution; Static Gamma - Toshiba REGZA XV*** User Manual

Picture controls (continued)

Static Gamma

The Static Gamma feature allows the adjustment of
levels of black in the picture.
In the Advanced Picture Settings menu press
1
to highlight Static Gamma.
e
Advanced Picture Settings
3D Colour Management
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor Settings
Active Backlight Control
Black/White Level
Static Gamma
Noise Reduction
Press or to select adjust the level.
z x
2
MPEG NR – Noise Reduction
When watching a DVD the compression may cause some
words or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by
smoothing out the edges.
In the Advanced Picture Settings menu press
1
to highlight Noise Reduction then press OK.
e
Advanced Picture Settings
3D Colour Management
Base Colour Adjustment
Colour Temperature
Auto Brightness Sensor Settings
Active Backlight Control
Black/White Level
Static Gamma
Noise Reduction
Press to select MPEG NR.
e
2
Noise Reduction
MPEG NR
DNR
Press or to select between Low, Middle,
z x
3
High or Off.
On
On
0
0
Off
On
0
0
Low
Auto
DNR – Digital Noise Reduction
DNR enables you to 'soften' the screen representation of a
weak signal to reduce the noise effect.
Select DNR from the Noise Reduction menu.
1
Noise Reduction
MPEG NR
DNR
Use
2 z
Middle or High. The differences may not always
be noticeable (for the best result use lower
settings as picture quality can be lost if the setting
is too high).
This features modifies SD quality pictures to near HD quality
levels, the levels can be selected for personal preference.
In the Advanced Picture Settings menu press
1
to select Resolution + then press OK.
e

Resolution +

Resolution +
Level
Press
e
2
select On.
x
Press
e
3
the level.
NOTE: Depending on the content, this may not
work correctly.
Depending on the equipment connected to the
television (i.e. equipment with specific enhancer
functions), noise may appear on the image.
30
or to select between Auto, Off, Low,
x
Resolution +
3
to select Resolution + and using
to select Level and using
Low
Auto
On
or
z
or adjust
z x