Error Messages; Replacement Parts - Hach LOC 100 Basic User Manual

Error messages

Displayed
Error description
errors
RFID communication error:
E-01
Tag sends no answer.
Distance too great or tag defective.
RFID collision error:
E-02
Several tags within range.
Unknown or incorrect tag:
Attempts to write on a tag intended
E-03
for reading or vice versa.
Reads in the operator ID, even
though this function was deactivated.
Data format error:
E-04
The data structure on the tag is
incorrect.

Replacement parts

Troubleshooting
Description
RFID set for sample identification, including LOC 100 RFID
Position the RFID tag
read/write device and operator, sample and location tags
closer to the instrument
or replace the tag.
LOC 100 RFID read/write device
Remove all tags from the Two RFID operator tags
reading area, except the
Three RFID sample tags, black
one that needs to be
read. Three RFID sample tags, yellow
Three RFID sample tags, red
Check whether the
Three RFID sample tags, blue
correct tag is being used
Three RFID sample tags, green
for the procedure.
Five RFID location tags, black
Two rechargeable AA Ni-MH batteries
Tag is damaged and
must be replaced.
Cat. no.
LQV156.99.10002
LQV156.99.20002
LZQ086
LZQ067
LZQ068
LZQ069
LZQ070
LZQ071
LZQ072
LZQ073
English 13