Canon MultiPASS C50 Service Manual page 50

Part 1: Facsimile
Choosing a Location for Your MultiPASS C50
Caution
IB2-3
Before unpacking your MultiPASS C50, follow these guidelines to
choose the best location for it.
Please review the information provided in "Safety Instructions", to
make sure you are installing your MultiPASS C50 for safe use.
Put the MultiPASS C50 in a cool, dry, clean, well ventilated place:
• Make sure the area is free from dust.
• Make sure the location is not affected by extreme temperature
changes, and always stays between 10° and 32.5°C.
• Make sure the area's relative humidity is always between 10%
and 90%.
Keep the MultiPASS C50 away from direct sunlight.
If possible, put the MultiPASS C50 near an existing telephone outlet,
to avoid the expense of installing a new one.
Place the unit near a standard 200–240 VAC power outlet.
Place the MultiPASS C50 near the PC you will be connecting it to.
Make sure you can reach it easily, as you will be using it as a
printer, fax machine, copier, scanner, and telephone.
Do not plug the MultiPASS C50 into the same circuit as an
appliance such as an air conditioner, electric typewriter, television,
or copier. Such devices generate electrical noise that can interfere
with your MultiPASS C50's ability to send or receive faxes.
Set the MultiPASS C50 on a flat, stable, vibration-free surface that is
strong enough to support its weight (about 5.6 kg).
Make sure the location you choose provides enough space around
the MultiPASS C50 for adequate ventilation, and to allow paper to
flow freely into and out of the unit. The figure below shows the
minimum space required for the unit.
1-30