Canon MultiPASS C50 Service Manual page 4

II. ABOUT THIS MANUAL
This manual is divided into five parts, and contains information required for servicing the product.
Part 1: Facsimile
This section describes the facsimile function of the respective product.
Part 2: Printer
This section describes the printer function of the respective product.
Each of the above parts is further divided into the following four chapters:
Chapter 1: General Description
This part explains product specifications and the how to service the unit safely. It is very important, so
please read it.
Chapter 2: Technical Reference
This part explains the technical theory of the product.
Chapter 3: Maintenance and Service
This part explains how to maintain the products for adjustment and troubleshooting and service
operations and service switches.
Chapter 4: Appendix
This part explains the informations of the optional products and user data flow.
REFERENCE
• For more details of user operations and user reports, see the separate volume of USER'S
GUIDE .
• Procedure for assembly/disassembly and greasing points are not given in this manual.
See the illustrations in the separate volume of PARTS CATALOG .
• Detailed description of each SSSW/parameter is not given in this manual except the new
SSSWs/parameters added to this model.
See G3 Facsimile Service Data Handbook (supplied separately) for details them.
• See the G3 Facsimile Error Code List (Rev.1, supplied separately) for details of the
error codes not shown in this manual.
• Detailed description of connector Locations and Signal Descriptions in not given in this
manual.
See the Circuit Diagram for details them.
II