Canon MultiPASS C50 Service Manual page 158

Part 1: Facsimile
#8 CLEAR
(Data initialization mode
#9 ROM
(ROM management)
#10 REPORT
(Service report output function)
(See page 3-59)
TEST MODE
BJ ADJUST
(See page 3-7)
NOTE
REFERENCE
TEL
USER SW
settings)
SERVICE SW
NCU
SERVICE DATA
REPORT
COUNTER
ALL
EC-04-01
980107 E100 FFFF
SELECT [0]---[2]
(See page 3-53)
A PATTERN PRINT
CHANGE VALUE
Figure 3-23 Service Data (page 6)
If USER SW is selected from #8 CLEAR, the memory management of the user data is not
cleared. If TEL or SERVICE SW is selected, the memory management of the user data is
cleared.
For details on test mode, see 6.2 Service Test Functions on page 3-53 .
Dialling data initialization
User data and service data #1 to #3
initialization
User data and service data #1 to #3 and
#6 to #7 initialization
#4 NCU setting data initialization
Data on system dump list initialization
Data on activity report initialization
Total number of pages printed/scanned
All user data, service data, activity
management data, and image data
initialization (except COUNTER)
Version No. and Checksum display
[0] System data list and
System dump list printing
[1] System data list printing
[2] System dump list printing
CLR SHQ2 (Not used)
CLR SHQ
CLR HQ
CLR HS
SHQ2 (Not used)
SHQ
HQ
HS
3-40
LF 0~60
or
RT