4IPNET EAP750 V1.00 Quick Installation Manual

Enterprise access point

Advertisement

Quick Links

EAP750 V1.00
Enterprise Access Point

Advertisement

Table of Contents
loading

Summary of Contents for 4IPNET EAP750 V1.00

  • Page 1 EAP750 V1.00 Enterprise Access Point...
  • Page 2: Copyright Notice

    4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations.
  • Page 3 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Copyright © 4IPNET, INC. All rights reserved.
  • Page 4 This declaration is only valid for configurations (combinations of software, firmware, and hardware) provided and supported by 4ipnet Inc. The use of software or firmware not provided and supported by 4ipnet Inc. may result in the equipment no longer being compliant with the regulatory requirements.
  • Page 5 EAP750 Enterprise Access Point ENGLISH Preface Package Contents 4ipnet EAP750 is a high-end, dual radio 802.11 1. 4ipnet EAP750 x 1 a/b/g/n 2.4GHz/5 GHz MIMO Access Point (AP) 2. Quick Installation Guide (QIG) x 1 with the best price/ performance for business and 3.
  • Page 6: System Overview

    Internet. PoE is also supported LAN 1- 2 Ports Attach Ethernet cables here to connect to the wired local network. Antenna 4 detachable antennas, 2 for each radio. Copyright © 4IPNET, INC. All rights reserved.
  • Page 7: Hardware Installation

     Using a different power adapter may damage this system.  To verify the wired connection between EAP750 and you switch / router / hub, please also check the LED status indicator of the respective network devices. Copyright © 4IPNET, INC. All rights reserved.
  • Page 8: Getting Started

    EAP750 Enterprise Access Point ENGLISH Getting Started 4ipnet EAP750 supports web-based configuration. When hardware installation is complete, EAP750 can be configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0 and above.
  • Page 9 The Web Management Interface - System Overview Page 5. To logout, simply click on the Logout button at the upper right hand corner of the interface to return to the Administrator Login Page. Click OK to logout. Copyright © 4IPNET, INC. All rights reserved.
  • Page 10: Common Settings

     Enter the old password and then a new password with a length of up to 32 characters, and retype it in the Re-enter New Password field.  Click SAVE to save the changes. Copyright © 4IPNET, INC. All rights reserved.
  • Page 11 1) Country Code: 840 (US) Note: DFS Channels: 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 2) Country Code: 250 (EU) DFS Channels: 52 56 60 64 Copyright © 4IPNET, INC. All rights reserved.
  • Page 12 (b) Enable a specific VAP from the drop-down menu of Profile Name and configure related settings below.  Check VAP status: After finishing VAP configuration, the status of enabled Virtual APs shall be reflected on the VAP Overview page. Copyright © 4IPNET, INC. All rights reserved.
  • Page 13 Quick Installation Guide EAP750 Enterprise Access Point ENGLISH Virtual AP Overview Page Copyright © 4IPNET, INC. All rights reserved.
  • Page 14 After clicking SAVE, the  Note: following message will appear: “Some modifications have been saved and will take effect after Reboot.” Congratulations! Now, 4ipnet EAP750 is installed and configured successfully. Copyright © 4IPNET, INC. All rights reserved.
  • Page 15  It is strongly recommended to make a backup copy of your configuration settings.  For further configuration and backup information, please refer to the User’s Manual. P/N: V10020120713 Copyright © 4IPNET, INC. All rights reserved.

Table of Contents